Lifting Magnet Repair and Rewinding
Repair and complete coil rewinding of industrial lifting electromagnets used in steel plants and material-handling operations, up to 37 kW.
- Up to 37 kW
- Complete coil rewinding
- Load testing
- Since 1978Ranchi, Jharkhand
- 45+ yearsof experience
- 10,000+equipment repaired
- ISO 9001:2015certified
- 65,000 sq ftworks area
What we do
- Fault finding on damaged or burnt lifting magnets
- Complete coil rewinding
- Insulation, drying and curing in our drying oven
- Load testing available
- Heavy handling with overhead cranes up to 30 Tonnes
How the work is done
Typical steps for a lifting magnets job at our works.
- 01
Inspection
Electrical tests to find the fault in the coil or leads.
- 02
Opening up
The magnet is dismantled and the damaged coil removed.
- 03
Rewinding
A new coil is wound and insulated.
- 04
Drying
The coil is dried and cured in our drying oven (40–200 °C).
- 05
Testing
Electrical tests and, where required, load testing before dispatch.
Facilities used
Equipment at our 65,000 sq ft works in Ranchi used for this work.
| Equipment | Capacity / make |
|---|---|
| Overhead cranes | 4 nos · up to 30 Tonnes |
| Hydraulic jacks | 3 nos · up to 300 Tonnes |
| Drying oven | 40–200 °C · 3000 × 2500 × 1500 mm |
| 3-phase full-wave rectifier set | 0–600 V, 350 A |
| High voltage test kit | RE, 100 kV AC / 70 kV DC |
Industries served: Steel plants and material handling — including SAIL, Tata Steel, JSW, Jindal Steel & Power, Essar Steel and Neelachal Ispat Nigam.
Questions about lifting magnets
What sizes of lifting magnets do you repair?
Industrial lifting electromagnets up to 37 kW.
Do you rewind the coil completely?
Yes. We carry out complete coil rewinding of lifting magnets.
Can a repaired magnet be load-tested?
Yes, load testing is available.
Need lifting magnets work?
Send us the equipment rating, make and the fault you see — we will get back to you with a plan and a quote.